Foil Doors

For Product cleaning only use a 5% soap, 95% water (liquid soap) solution, wiping with a damp (not wet) cloth, finally drying with a soft clean cloth. Dust with a soft cloth only.

Do not use wax-furniture polish, abrasive or aggressive cleaners, bleach or other hypo-chlorate (chlorine) based cleaners, multi-purpose cleaners dilutes, acetone, alcohol, solvent or similar products on the door, as this will damage the surface

Cooking splashes should be wiped up immediately using a damp cloth.

Stainless Steel Doors

For product cleaning only use a 5% soap, 95% water (liquid soap) solution, wiping with a damp (not wet) cloth, finally drying with a soft clean cloth, or alternatively clean the surface with a Second Nature stainless steel cleaner or E-cloth (available here). Dust with a soft cloth only

Do not use wax-furniture polish, abrasive or aggressive cleaners, bleach or other hypo-chlorate (chlorine) based cleaners, multi-purpose cleaners dilutes, acetone, alcohol, solvent or similar products on the door, as this will damage the surface

Cooking splashes should be wiped up immediately using a damp cloth.

A light coat of baby oil can be used to enhance the appearance of the door if required.

Timber and veneer Doors

For Product cleaning only use a 5% soap, 95% water (liquid soap) solution, wiping with a damp (not wet) cloth, finally drying with a soft clean cloth. Dust with a soft cloth only, following the grain pattern of the wood

Do not use abrasive or aggressive cleaners, bleach or other hypo-chlorate (chlorine) based cleaners, multi-purpose cleaners dilutes, acetone, alcohol, solvent or similar products on the door, as this will damage the surface

It is advisable to use a damp (not wet) cloth to remove fingerprints and marks, followed at once with a clean and dry soft cloth. Cooking splashes should be wiped up immediately using a damp cloth.

All timbers are adversely affected by the environment in which they are installed, particularly a moist climate and in high levels of humidity. Timber is hygroscopic which means the material will take up or let out moisture depending on the environment it is place in. We therefore recommend that timber doors only be installed in areas that have been suitably acclimatized so that the timber is allowed to find its EMC (Equilibrium moisture content). Most people are aware of the fact that wood changes colour when exposed to light, the rate of change being dependent upon the species and the intensity of exposure. Therefore, please consider when ordering and additional timber door some time after the original kitchen has been installed that a variation in colour is probable.

Vinyl Doors

For Product cleaning only use a 5% soap, 95% water (liquid soap) solution, wiping with a damp (not wet) cloth, finally drying with a soft clean cloth. Dust with a soft cloth only.

Do not use wax-furniture polish, abrasive or aggressive cleaners, bleach or other hypo-chlorate (chlorine) based cleaners, multi-purpose cleaners dilutes, acetone, alcohol, solvent or similar products on the door, as this will damage the surface

Cooking splashes should be wiped up immediately using a damp cloth.

If the doors are supplied with a protective film on the face they must not be directly exposed to sunlight. It is recommended the film is removed as soon as possible.

Additional recommendation for Pesca only;
Due to the special nature of the surface on this product it is important to clean any spills or cooking splashes off immediately. Particular attention must be given to oils and fats. Please follow the Care and Maintenance Guidelines carefully.